Your NAS holds files, photos and remote access. Four layers to set up once, then a ten-minute monthly check. The final part of our NAS series.
- Date
- Reading
- 4 min read
- Written by
- Nick Li
- Tags
- #Risk#Engineering
Over this series your NAS has taken on a lot: the office's files, everyone's phone photos, remote access from anywhere. That makes it worth protecting properly. This last part is the checklist we use ourselves: four layers, set up once, then ten minutes a month. Synology's own security guide covers similar ground; this is the short version, in the order that matters.
Four layers between the internet and your files
Internet
│ Router: no port forwards, UPnP off, its own updates
▼
Your network (guest Wi-Fi kept apart)
│ NAS firewall: local network + Tailscale only
▼
DSM sign-in: personal accounts, 2FA, Auto Block
│
▼
Your files ◄── snapshots + Hyper Backup if all else fails
1. Updates: the layer that fails quietly
Most NAS break-ins use a flaw that already had a fix, on a box that never installed it. Our ransomware article shows how fast that happens.
-
In Control Panel → Update & Restore → Update Settings, let DSM install important security updates automatically (Synology: Update). Turn on Package Center's automatic updates too.
-
Set up email or app notifications, so you hear about failed updates and drive warnings.
-
Check your model on Synology's product support status page. A NAS that no longer gets security updates should leave the internet entirely, then be replaced.
-
Our Patch Tracker follows security releases for common software if you run more than a NAS.
2. Accounts: one person, one login
-
Don't use the built-in
adminaccount. Create your own administrator and deactivate the default one (Synology's steps). New DSM 7 installs already do this; older boxes often haven't. -
Use the admin account only for admin work. Day to day, sign in with a normal account, so a stolen phone or a phishing page gets a normal account.
-
Two-factor sign-in for everyone, as in part four.
-
Remove people the day they leave, and give each person access to the shared folders they need and nothing more, as we set up in part two.
3. The router: the settings that matter
-
Delete old port forwards to the NAS (5000, 5001, 21, 22, 80, 443). With Tailscale or QuickConnect from part four, you need none.
-
Turn UPnP off. It lets any device on the network open ports by itself, including a NAS app you forgot about.
-
Change the router's own admin password and install its firmware updates. A router left on factory settings undoes everything else on this list.
-
Put visitors and smart devices on guest Wi-Fi. The cheap camera or smart plug should never be on the same network as your files.
4. On the NAS: close what you don't use
-
Turn on the firewall (Control Panel → Security → Firewall): allow your local network and Tailscale's addresses (
100.64.0.0/10, see Tailscale's docs), deny everything else. -
Auto Block on, so repeated failed logins get blocked.
-
Turn off what you don't use: SSH and Telnet (Control Panel → Terminal & SNMP), FTP, old file services like AFP, and any package you installed once to try.
-
Take snapshots with Snapshot Replication: read-only copies of each shared folder every hour or day. If ransomware encrypts the files, you roll back to this morning. Snapshots need a Btrfs volume, the default on most models (quick start); mark them immutable if your DSM offers it, so nobody can delete them, including an attacker with your password.
-
Run Security Advisor once now, and let it scan on a schedule. It checks most of this page for you.
The monthly ten minutes
| Every month (10 minutes) | Where in DSM | What you want to see |
|---|---|---|
| Updates | Control Panel → Update & Restore; Package Center | up to date, no pending security update |
| Backups | Hyper Backup | last run succeeded, within the last day or two |
| Drives | Storage Manager | every drive "Healthy", no new bad sectors |
| Who logged in | Log Center; Auto Block list | only people and places you expect |
| Accounts | Control Panel → User & Group | nobody who has left, no unused admins |
| Overall | Security Advisor scan | no red items |
If you only keep one habit, make it the Hyper Backup line: a backup that failed in August is no use in November.
The whole series
-
Keeping it safe (this article)
A NAS is safest when the internet can't see it, the right people can, and a copy lives somewhere else.
If you'd like us to go through this checklist with you on your own NAS and router, get in touch.
