Ransomware is locking files on Synology NAS boxes that missed updates. How to check your DSM version, internet exposure and backups in minutes.
- Date
- Reading
- 5 min read
- Written by
- Nick Li
- Tags
- #Risk#Engineering
Plenty of small companies in Hong Kong keep everything on one Synology NAS: quotes, contracts, accounts, design files. Over the past few weeks, ransomware has been going after exactly these boxes. Files are encrypted and renamed to .L0CK3D, and a read-me3.txt note appears in every folder demanding bitcoin.
The victims are mostly NAS boxes that weren't updated. The good news is that prevention isn't complicated, and most of it can be done today.
What happened
- 18 September: Synology released a security update for its NAS system, DSM, fixing nine flaws. The two worst are rated 9.8 out of 10: an attacker on the internet can read and write files on the NAS without a password. Synology lists no workaround, only the update.
- Early October: ransomware called C3RB3R started encrypting files on unpatched NAS boxes. According to security researchers, the attackers use exactly those two flaws, about six weeks after the fix came out.
- 29 October: Synology warned that attackers are also using a flaw fixed back in late 2024 against NAS boxes that haven't been updated in years, and urged all users to update now.
Reports differ on which flaw is the main way in, but the common thread is clear: the affected boxes hadn't been updated. There is no free public decryption tool. If files are locked and there's no separate backup, they are probably gone.
Check your NAS in five minutes
Log in to DSM, open Control Panel → Info Center, note the DSM version, and compare it with this table:
| Your version | Safe version (or later) |
|---|---|
| DSM 7.4 | 7.4-90075 |
| DSM 7.3 | 7.3.2-86009-4 |
| DSM 7.2.2 | 7.2.2-72806-9 |
| DSM 7.2.1 | 7.2.1-69057-12 |
| DSM 7.1, 7.0 or 6.x | Not on the list: upgrade soon, or consider replacing the box |
If yours is older, go to Control Panel → Update & Restore and update now. Before you do, make sure important files have a copy somewhere else. The NAS restarts during the update, so do it after office hours. Then switch on automatic installation of important updates on the same page.
If an outside IT company set up your NAS, ask them directly: "Which DSM version are we on, and is the 18 September update installed?" You should get an answer within a day.
Can the internet reach your NAS?
In this campaign, attackers could find the NAS straight from the internet. Many companies set up "port forwarding" on the router so staff can reach files from home, which opens the NAS login page to the whole internet. Often even the IT person has forgotten it's there.
- Check the router: look for ports such as 5000 or 5001 forwarded to the NAS. If you find one and don't know why it's there, close it.
- Use a VPN for home access: staff connect to the office VPN first, then reach the NAS, so the NAS itself never faces the internet.
- QuickConnect: Synology's remote access service is convenient, but it also makes the NAS reachable from outside. If you don't need it, turn it off under Control Panel → External Access.
- The basics: disable the default admin account, turn on two-factor sign-in for every account, and enable Auto Block under Control Panel → Security, which blocks addresses after repeated failed logins.
RAID is not a backup
This is the point we explain most often. RAID keeps your data when one disk dies. But when ransomware encrypts your files, RAID faithfully copies the encrypted files to every disk. Everything on the NAS can be locked at the same moment.
Real protection is a copy the ransomware can't touch:
- Immutable snapshots: DSM's Snapshot Replication can make immutable snapshots that nobody, not even an administrator, can delete or change for a set number of days.
- An offline or off-site backup: use Hyper Backup to copy data regularly somewhere else, such as a USB drive you unplug between backups, or cloud storage. What matters is that the NAS can't overwrite it at will.
- Test a restore: once a quarter, restore a few files from the backup. A backup you have never tested isn't really a backup.
If files are already locked
- Unplug the NAS network cable straight away, to stop the encryption spreading and keep other computers safe.
- Don't reset or format it in a hurry. Photograph the ransom note and write down the time. Both help with investigation and recovery.
- Don't rush to pay. Paying doesn't guarantee your files back, and be careful with companies online that offer to "decrypt" for you.
- Check your snapshots and backups, make sure they weren't hit, then plan the restore.
- Get help. Contact Synology support, your IT provider, or HKCERT, Hong Kong's computer security incident centre. If the files include customers' personal data, also consider telling the people affected and the Privacy Commissioner's office.
A short checklist
- DSM updated to the version in the table or later, with automatic updates on
- No router rule forwarding the NAS login page to the internet; home access goes through a VPN
- The admin account disabled, and two-factor sign-in on every account
- Immutable snapshots, plus one offline or off-site backup
- A restore tested within the last three months
This is one more example of attacks arriving within weeks of a fix, a trend we wrote about in AI is turning security patching into a race against time.
A NAS puts all your files in one place. It puts the risk in one place too.
If you aren't sure your NAS is set up safely, or you'd like a backup routine you can rely on, let's talk.
